Modifications apportées à l'étape #3
Modifié par Bas Flipsen —
Modification approuvée par Bas Flipsen
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [title] Opening the casing |
|---|---|
| + | [* black] After a small wait for the glue to become fluide, you have to use a wrench and a spudger to disconnect the two case-parts. |
| + | [* black] The two parts are press-fitted so you need a lot of force to take them apart from each other. |
| + | [* black] Use a high torque to rotate the two parts relative to each other. |
| + | [* icon_caution] While rotating pull with low force. When you pull to hard the two parts you could break the internal wiring (which are very fragile) |
| + | [* black] slightly moved the two parts from each other, use a spudger to take the two parts apart. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté
Image 3
Aucune image précédente
Ajouté