Modifications apportées à l'étape #3
Modifié par Bas Flipsen —
Modification approuvée par Bas Flipsen
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Opening the casing | |
| - | [* black] After a small wait for the glue to |
| + | [* black] After a small wait for the glue to become soft, you have to use a wrench and a spudger to disconnect the two case parts. |
| [* black] The two parts are press-fitted so you need a lot of force to take them apart from each other. | |
| [* black] Use a high torque to rotate the two parts relative to each other. | |
| - | [* icon_caution] While rotating pull with low force. When you pull to hard you could break the internal wiring (which |
| - | [* black] slightly |
| + | [* icon_caution] While rotating pull with low force. When you pull to hard you could break the internal wiring (which is very fragile) |
| + | [* black] slightly move the two parts from each other, use a spudger to complete the disconnection of these two parts. |