Modifications apportées à l'étape #3
Modifié par Carter Willson —
Modification approuvée par Carter Willson
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] Each RAM stick has two (2) snap locks, one on each end ( red box). In the image the bottom snap is obscured by the cable. |
|---|---|
| + | [* black] Pull each snap outward (away from the RAM stick) until the RAM stick pops up. |
| + | [* black] Continue to hinge the RAM stick upward until it can be freely removed from its slot. |
| + | [* icon_note] Take note of the orientation of the RAM stick, as in what side the notch is on. This will allow you to properly install the new RAM stick on reassembly. |
| + | [* black] Repeat for the second RAM stick. |
Image 1
Aucune image précédente
Ajouté