Modifications apportées à l'étape #10
Modifié par Raneem Ahmad —
Modification approuvée par Brendan
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [title] Depth Sensor |
|---|---|
| [* light_blue] Assemble together the Depth sensor by adding the o-rings, and the connective wires | |
| [* violet] Note that the connective wires connect the depth sensor to the sensor node board. The red wire is responsible for power, black is for ground, and white is for data | |
| [* red] Place the depth sensor through the larger hole, and place it firmly by tightening the nut ring |