Modifications apportées à l'étape #17
Modifié par Ian Thompson —
Modification approuvée par Brooke Mason
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Connecting Sensors, Solar Panel to Node Board | |
| - | [* icon_note] Now the sensor node is attached to the modem, the depth sensor and solar panel is attached to the box |
| - | [* light_blue] Connect the depth sensor |
| - | [* violet] Connect the solar panel wire to small green block |
| + | [* icon_note] Now the sensor node is attached to the modem, and the depth sensor and solar panel is attached to the box |
| + | [* light_blue] Connect the depth sensor wires to any green block (one that fits) on the sensor node |
| + | [* violet] Connect the solar panel wire to small green block on the sensor node as shown in the picture |
| [* red] Put the sensor node board in the enclosure box, and screw it in using a screw driver |