Modifications apportées à cette étape
Modifié par Ian Thompson —
Modification approuvée par Carsten Frauenheim
- Avant
- Après
- Inchangé
Lignes de l'étape
+ | [title] Board Setup Testing pt. 2 |
---|---|
+ | [* black] open PuTTY and click "Serial" under connection type |
+ | [* blue] for "Serial line" check your device manager to see what port number your serial converter is plugged into. For me, it was "COM4" |
+ | [* red] for "Speed" enter 115200 |
+ | [* black] Hit "Open," plug in your board (or reset it), and you should start seeing output in the terminal |
+ | [* green] Look for this section in your serial output. It records the results for the 4 setup tests performed on the device |
+ | [* icon_note] If the device returns a status of 1 for each of the four tests, the device is ready for further testing (outdoors on the rack) |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté