Modifications apportées à l'étape #8
Modifié par bmwalter —
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Now that the side panels are removed, we can begin removing the camera's front bezel. | |
| - | |
| - | |
| - | |
| + | [* green] First, remove the two small Phillips screws on the lens side of the camera. These are identical to the screws we removed earlier |
| + | [* yellow] Using a spudger or small flat-blade screwdriver, gently lift the metal tab on the other side of the camera so that it clears the nub on the chassis. |
| + | [* black] Push the front bezel forward just enough so that the tab does not snap back into place. |