Modifications apportées à l'étape #2
Modifié par Eric Donaldson —
Modification approuvée par Eric Donaldson
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Remove one #00 Philips head screws from the bottom of the camera frame. This will free the lens and motherboard from the frame. |
|---|---|
| + | [* red] Remove one 2mm #00 Philips head screws from the bottom of the camera frame. This will free the lens and motherboard from the frame. |
| [* icon_caution] Be careful not to completely remove the metal frame, there is still a small wire ribbon attached. | |
| [* orange] Gently separate the metal frame from the lens assembly just enough to reach the wire ribbon on the front side of the camera. | |
| [* orange] Use the rubber tipped tweezers to unplug the wire ribbon. |