Modifications apportées à l'étape #3
Modifié par Eric Donaldson —
Modification approuvée par Eric Donaldson
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* red] Use the black spudger to remove the last remaining wire ribbon plug on the motherboard, located on the side facing the plastic frame. | |
| - | [* orange] Remove the #00 Phillips head screw on the lower left corner of the motherboard. The motherboard should now be free from the plastic frame. |
| + | [* orange] Remove the 2mm #00 Phillips head screw on the lower left corner of the motherboard. The motherboard should now be free from the plastic frame. |