Modifications apportées à l'étape #2
Modifié par Tanmayi Ambati —
Modification approuvée par Tanmayi Ambati
- Avant
- Après
- Inchangé
Lignes de l'étape
+ | [* red] Remove two silver #00 Phillips head screws located near the top of the back panel. |
---|---|
+ | [* orange] Remove the two silver #00 Phillips head screws on the top side. |
+ | [* yellow] Use the black spudger to unclip the ribbon on the top right corner and remove it. |
+ | [* black] Once the above steps are completed, gently pull the flash assembly from the device. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté
Image 3
Aucune image précédente
Ajouté