Modifications apportées à l'étape #2
Modifié par Eric Donaldson —
Modification approuvée par Eric Donaldson
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Remove two silver #00 Phillips head screws located near the top of the back panel. |
|---|---|
| - | [* orange] Remove the two silver #00 Phillips head screws on the top side. |
| + | [* red] Remove two silver 2mm #00 Phillips head screws located near the top of the back panel. |
| + | [* orange] Remove the two silver 2mm #00 Phillips head screws on the top side. |
| [* yellow] Use the black spudger to unclip the ribbon on the top right corner and remove it. | |
| [* black] Once the above steps are completed, gently pull the flash assembly from the device and snap out the capacitor located on the front side of the camera |