Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Eric Donaldson

Modification approuvée par Eric Donaldson

Avant
Après
Inchangé

Lignes de l'étape

[* red] Remove the 4mm #00 Philips screw located on the top left corner beneath the front panel.
[* orange] Remove the 5mm #00 Philips screw located on the top left corner beneath the front panel.
[* yellow] Remove the 5mm #00 Philips screw located on the top of the left side panel near the microphone connection.
[* green] Remove the 4mm #00 Philips screw located on the bottom left corner beneath the front panel.
-[* light_blue] Similar to the clip in back panel, unclip this one too using a black spudger and then remove it using the nylon tipped tweezers.
-[* black] Once its unclipped, remove the side panel.
+[* light_blue] Using a black spudger, unclip the orange wire ribbon on the lower left corner of the motherboard and then remove it using the nylon tipped tweezers.
+[* black] The side panel is now free and can be removed by pulling the panel to the left.