Modifications apportées à l'étape #23
Modifié par bac —
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* red] Remove the 3 screws holding the CF card slot. |
|---|---|
| + | [* black] Lift up the CF card slot - in the 2nd photo you'll see a ribbon cable going through the slot to the front of the camera. We earlier disconnected this ribbon cable from its socket on the front of the main PCB. |
| + | [* black] Simply pull the ribbon cable out, but be sure to note the slot it goes through for later reassembly. |
| + | [* black] The 3rd photo shows the rear of the camera with the CF card slot removed. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté
Image 3
Aucune image précédente
Ajouté