Modifications apportées à l'étape #5
Modifié par Hello Goodbye —
Modification approuvée par Hello Goodbye
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [title] Detach Webcams |
|---|---|
| + | [title] Detach Webcams |
| [* black] The front facing camera can easily come out by prying it up with a plastic tool. | |
| [* black] The rear facing camera is glued down and needs a little more elbow grease to unstick. If you're lucky, it'll remain sticky and can be reapplied on the new assembly. | |
| [* black] ++TRANSFER PLASTIC SQUARE TO NEW ASSEMBLY++ | |
| [* black] Using tweezers, the plastic square under the rear facing webcam (only) should be peeled up and transferred to the new assembly. | |
| [* black] Use a plastic spudger tool to push down the new square if there is enough adhesive left to stick it. If not, use double-sided tape. |