Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Joshua Busick

Modification approuvée par Joshua Busick

Avant
Après
Inchangé

Lignes de l'étape

[* black] Using #1 Phillips screwdriver, remove the two screws at the bottom of the display panel.
-[* black] Lift slightly from the top, then pull outwards.
+[* icon_note] Lift slightly from the top, then pull outwards.
[* black] Flip the display panel around to find a ribbon cable near the center of the bottom of the panel. This cable will have some orange tape wrapped around the connector. Once removed the ribbon cable will simply pull out of the connector.