Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Cory

Modification approuvée par Cory

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Loosen the three screws that hold the rear access panel on, using your Phillips #2 Screwdriver.
+[* black] Lay the device on its face with the battery facing away from you and locate the center panel. It will have two vents in it and three screws on the left side.
[* icon_note] The screws will not actually come out from the panel but you feel a noticeable change in resistance when fully backed out.
[* black] Lift the left side of the panel to remove it.