Modifications apportées à l'étape #1
Modifié par Javier Guerra —
Modification approuvée par Javier Guerra
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Insert an opening pick under the screen, starting at the top of the phone. | |
| - | [* black] Work the pick along the edges of the phone, |
| + | [* black] Work the pick along the edges of the phone, loosening adhesive from these parts of the screen. |
| [* black] After placing the picks along the edge of the screen, refer to step 2. | |
| - | [* icon_note] Unlike the front of the phone, it is fine to use the picks on the left side of the phone |
| - | [* icon_note] While not necessary, applying a heat gun will weaken the adhesive, making this step easier. |
| + | [* icon_note] Unlike the front of the phone, it is fine to use the picks on the left side of the phone because there are no cables. |
| + | [* icon_note] While not necessary, applying a heat gun will weaken the adhesive, making this step significantly easier and quicker. |