Modifications apportées à l'étape #1
Modifié par Raymond Kwasneski —
Modification approuvée par Raymond Kwasneski
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Turn the laptop off then remove the battery. Place it down so that the back is facing up. | |
| [* red] Unscrew the two screws with a RAM/WiFi icon. Use a J1 bit. | |
| - | [* icon_note] Note: |
| + | [* icon_note] Note: These screws are retained (not designed to be removed). Just loosen them. |
| [* orange] After the screws are loosened, pull the cover off by lifting from the side with the screws. |