Modifications apportées à l'étape #10
Modifié par Johnny Doan —
Modification approuvée par Johnny Doan
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Under the M.2 dust cover, there will be a plastic film to cover the adhesive. Grab the corner edge of the adhesive and pull towards yourself. | |
| [* black] When your halfway down the dust cover; peel downwards. To ensure entire removal of the film. | |
| [* black] Place the dust cover end edges first into the area label M.2. Then slowly press down throughout the cover ensuring adhesive contact. | |
| [* icon_caution] Do not place the adhesive in the center or on the SSD first. This can cause complication aligning it correctly. | |
| - | [* icon_note] The plastic film may get stuck in chucks. Do not use finger nails or sharp objects to |
| + | [* icon_note] The plastic film may get stuck in chucks. Do not use finger nails or sharp objects to pick at the film. The adhesive cover is soft and spongy. Use a blow dryer to soften the adhesive then grab it gently pulling towards yourself. |