Modifications apportées à l'étape #1
Modifié par Apurva Patel —
Modification approuvée par Apurva Patel
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] First it is necessary to remove the ribbon cable connecting the control board to the rear circuit board on the camera. This is done by unsnapping the jawbone connector and gently pulling the cable out with tweezers or the pry stick. |
|---|---|
| + | [* black] First it is necessary to remove the ribbon cable connecting the control board to the rear circuit board (green) on the camera. |
| + | [* black] This is done by unsnapping the jawbone connector and gently pulling the cable out with tweezers or the spudger. |