Modifications apportées à l'étape #2
Modifié par John Lacadin —
Modification approuvée par John Lacadin
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Flip the device over. | |
| - | [* |
| + | [* red] With a Phillips #00 screw driver, loosen the screw located at the top of the base panel. |
| [* icon_note] Loosen the screw so that it is removed from the insert but is still connected to the base panel. This will create an opening for the next step. |