Modifications apportées à l'étape #7
Modifié par Chris Mathe —
Modification approuvée par Chris Mathe
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Connect the lighting, motor, and AC in wires to the replacement remote receiver. | |
| [* black] Gently tug each wire connection and make sure it's properly terminated with the twist on connectors. | |
| [* black] Cut a 15 cm piece of electrical tape and wrap around the end of each wire. | |
| - | [* |
| + | [* icon_reminder] Attach electrical tape at the base of each wire first. Then finish wrapping tape around the wire connector. This will ensure wires do not come loose when they are tucked into the junction box. |