Modifications apportées à l'étape #4
Modifié par Meagan Tobias —
Modification approuvée par Meagan Tobias
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [title] Measure jumpers |
|---|---|
| + | [* black] Using a multimeter, touch the ground to any of the ground pinouts on the board and measure the JP1 and JP2 jumpers |
| + | [* black] You should see 12V on the middle and bottom pin of JP1 and 12V on the bottom pin of JP2. The top pin of JP2 should be ~ 3.6V |