Modifications apportées à l'étape #9
Modifié par Adam O'Camb —
Modification approuvée par Adam O'Camb
- Avant
- Après
- Inchangé
Lignes de l'étape
- | [* red] Use a 3/8 inch wrench to remove the three brass plugs on the bottom of the pressure switch. |
---|---|
- | [* black] To remove the plug that is on the same axis as the air tank nipple, brace the pressure switch assembly with a pair of channellock pliers, or something similar. You may need a lot of leverage to break the plug free. |
+ | [title] Remove the brass plugs |
+ | [* red] Use a 3/8 inch open-ended wrench to remove the three square head brass plugs on the bottom of the pressure switch. |
+ | [* black] To remove the plug that opposite the air tank nipple, brace the pressure switch assembly with a pair of channellock pliers or something similar. |
+ | [* icon_note] You may need a lot of leverage to break the plug free. |
[* icon_reminder] During reassembly, transfer these plugs to the new pressure switch if it does not include new ones. | |
[* icon_reminder] During reassembly, apply green thread locker (Loctite 290) to the plug threads to prevent the plugs from loosening. |