Modifications apportées à l'étape #3
Modifié par Carsten Frauenheim —
Modification approuvée par Carsten Frauenheim
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Use pliers to disconnect the wires connecting the power switch to the main PCB assembly. |
|---|---|
| + | [* icon_note] There are two wires connecting the power switch to the main PCB assembly. |
| + | [* black] Use needle nose pliers to remove the wire with the blue connector. |
| + | [* black] Remove the wire with the clear connector. |
| [* black] Remove the right-side cover. | |
| [* icon_reminder] During reassembly, install the power switch wires back in their original locations with the blue wire above the clear wire. |