Modifications apportées à l'étape #5
Modifié par Sam Omiotek —
Modification approuvée par Sam Omiotek
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Disconnect the motor and pump assembly | |
| - | [* black] Use a pair of pliers to disconnect the wires connecting the motor and pump assembly to the main PCB board: |
| + | [* black] Use a pair of needle nose pliers to disconnect the wires connecting the motor and pump assembly to the main PCB board: |
| [* red] One [link|https://d3nevzfk7ii3be.cloudfront.net/igi/1hRInVGfNVBTy1To.full|red cable|new_window=true] labeled ***MOTOR 2*** on the main PCB board | |
| [* orange] One [link|https://d3nevzfk7ii3be.cloudfront.net/igi/3pI1EPSb6Nahjy5U.full|orange cable|new_window=true] labeled ***MOTOR 1*** on the main PCB board | |
| + | [* icon_note] Pull the wires with the needle nose pliers by their connectors and not the wires themselves. |