Historique de l'étape n° 2 de Fluorescent Light Ballast Replacement

Modifications apportées à l'étape #2

Modifié par Forrest Jones — 15 avr. 2021

Modification approuvée par Forrest Jones

-	[* ~~black~~] Check bulbs for failure by looking for black coloring at the ends of the bulbs.
-	[* ~~black~~] If this is observed then remove the bulbs by twisting 90 degrees and carefully wiggling them and pulling down.
+	[* red] Check bulbs for failure by looking for black coloring at the ends of the bulbs.
+	[* icon_note] If this is observed then remove the bulbs by twisting 90 degrees and carefully wiggling them and pulling down.
	[* black] Replace with same type of bulb. If this does not fix the issue, remove all bulbs and move on to step 3