Historique de l'étape n° 4 de Fluorescent Light Ballast Replacement

	[* icon_caution] *Shock Hazard*. Check the fixture for voltage using the non-contact voltage reader according to the device’s instructions.
-	[* icon_caution] *Shock Hazard*. After removing wire nuts, do not touch the bare wires ~~the wire nuts were covering~~.
-	[* black] Remove wire nut by twisting ~~wire nut~~ counterclockwise from the hot side (black or red wire) and the neutral side (white wire). Do not untwist wires.
+	[* icon_caution] *Shock Hazard*. After removing wire nuts, do not touch the bare wires.
+	[* black] Remove wire nut by twisting it counterclockwise from the hot side (black or red wire) and the neutral side (white wire). Do not untwist wires.

	[* icon_caution] *Shock Hazard*. Check the fixture for voltage using the non-contact voltage reader according to the device’s instructions.
-	[* icon_caution] *Shock Hazard*. After removing wire nuts, do not touch the bare wires ~~the wire nuts were covering~~.
-	[* black] Remove wire nut by twisting ~~wire nut~~ counterclockwise from the hot side (black or red wire) and the neutral side (white wire). Do not untwist wires.
+	[* icon_caution] *Shock Hazard*. After removing wire nuts, do not touch the bare wires.
+	[* black] Remove wire nut by twisting it counterclockwise from the hot side (black or red wire) and the neutral side (white wire). Do not untwist wires.