Modifications apportées à l'étape #10
Modifié par Shawn Menard —
Modification approuvée par Corbanizer
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Disconnect all wires from the ballast. | |
| [* black] Use a screwdriver to remove the ballast from the light fixture. | |
| - | [* icon_note] If necessary, cut the wires close to the ballast. The cut wires can be used later. |
| + | [* icon_note] If necessary, cut the wires close to the ballast. The cut wires can be re-used later. |