Modifications apportées à l'étape #3
Modifié par Gina Kittleson —
Modification approuvée par Gina Kittleson
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Adding Jumper Wires | |
| [* black] Using 5 different colored jumper wires connect the 6 pin connector on the node board to a 5 pin connector. | |
| [* yellow] On the board, screw the jumpers into the terminals omitting the final terminal on the right. | |
| - | [* yellow] In the order of (left to right): pulses to sampler, bottle count, power, ground, and event mark. |
| - | [* violet] On the 5-pin connector, screw the jumpers into the terminal in the order of ( |
| + | [* yellow] In the order of (left to right): pulses to sampler (white), bottle count (green), power (red), ground (black), and event mark (blue). |
| + | [* violet] On the 5-pin connector, screw the jumpers into the terminal in the order of (bottom of screen to top): power (red), pulses to sampler (white), ground (black), event mark (blue), and bottle count (green). |