Modifications apportées à l'étape #4
Modifié par Meagan Tobias —
Modification approuvée par Meagan Tobias
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Testing Wiring | |
| - | [* black] Determine which wire is connected to which pin using a |
| + | [* black] Determine which wire is connected to which pin using a multimeter on the resistance setting. |
| [* red] The pins as shown in figure 4-2 are the opposite of the pins circled in red. | |
| [* black] The wire colors as determined by this test for this wire configuration are as follows: blue = bottle number, green = pulses to autosampler, brown = event mark, black = power, white = ground, red = inhibit. |