Modifications apportées à l'étape #8
Modifié par Gina Kittleson —
Modification approuvée par Gina Kittleson
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Feed Wires Through the Node Box | |
| - | [* red] Pull the battery connection wires that go to their respective amphenol connectors through the two lower ports. |
| + | [* red] Pull the battery connection wires that go to the 2-pin amphenol battery box connectors through the middle port. |
| + | [* black] Pull the battery connection wires that go to the 2-pin amphenol autosampler batter connector through the bottom port. |
| [* orange] Pull only the portion of the autosampler wires through the top port that has the signal wires (e.g. the bottle count and pulses). | |
| [* green] Twist the outer side of the port down until it fits snuggly around the wire. |