Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Austin Blakely

Modification approuvée par Austin Blakely

Avant
Après
Inchangé

Lignes de l'étape

[* icon_note] Make sure computer is off before you begin.
-[* red] Start by removing base cover by unscrewing the four, 5mm screws labeled in red using a Philips J00 screwdriver.
-[* blue] Then loosen the captive screws from base cover indicated in blue with a Philips J00 screwdriver.
+[* red] Remove the four 5 mm screws from the bottom edge of the laptop using a Philips #00 screwdriver.
+[* blue] Loosen the remaining six captive screws from the bottom cover with a Philips #00 screwdriver.