Modifications apportées à l'étape #3
Modifié par Robin Taylor —
Modification approuvée par Robin Taylor
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Troubleshoot the charging system: Alerternator Fuse | |
| - | [* black] Open the Fuse box and check the 120A charging fuse. My fuse was good you can see the copper link. You can test the fuse with your multi-meter set on Resistance(***Ω***). Place one probe on each of the fuse retaining screws. It should read 0Ω (Ohms) as shown. |
| + | [* black] Open the Fuse box and check the 120A charging fuse. My fuse was good you can see the copper link. You can test the fuse with your multi-meter set on Resistance(***Ω***). Place one probe on each of the fuse retaining screws. It should read 0Ω (Ohms) as shown. (I would expect this fuse to be good.) |