Modifications apportées à l'étape #1
Modifié par Timothy Fryer —
Modification approuvée par Timothy Fryer
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] First of all, there are five screw sizes you'll encounter in this guide. I'll refer to them as size 1-5 throughout this guide. |
|---|---|
| + | [* black] Far Left (size 1): These screws secure the mainboard. There is also one helping to secure the I/O plate. |
| + | [* black] 2nd from left (size 2): This screw secures a ground wire to the I/O plate. |
| + | [* black] 3rd from left (size 3): These screws are used exclusively on the I/O plate. |
| + | [* black] 4th from left (size 4): These screws hold the projector's outer case together. |
| + | [* black] 2nd picture (size 5): Two of these screws secure the yoke assembly. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté