Modifications apportées à l'étape #6
Modifié par Jovita Gomez —
Modification approuvée par Jovita Gomez
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Using a ruler (inch), measure the diameter of the spigot threads as accurate as possible, as this measurement is crucial as it will determine the size of the part needed. |
| + | [* black] This specific spigot is 1 1/8 or 1.17 inch in diameter so a SM01.125 adapter from Spigot Masters was ordered and used. |
| + | [* black] *OPTIONAL* |
| + | [* black] If the hose thread outlet is ¾ inch, the adapter can be omitted as it is already the desired diameter for a common hose. A vacuum breaker can still be used as long as it is the corresponding size. |