Modifications apportées à cette étape
Modifié par Matthew Aguiar —
Modification approuvée par Matthew Aguiar
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] To fix the issue of the lack of charge, you must first take off the back cover. To do this, locate each screw that is located on the back panel and loosen them up. Once each screw has been loosened up, use a plastic pry-bar and go around the outer perimeter to remove the back cover. |
|---|
Image 1
Aucune image précédente
Ajouté