Modifications apportées à l'étape #8
Modifié par Clay Eickemeyer —
Modification approuvée par Clay Eickemeyer
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Loosen the board ribbon cable adhesive | |
| - | [* black] [guide|25705|Heat an iOpener|new_window=true] and apply it to the board ribbon cable for |
| + | [* black] [guide|25705|Heat an iOpener|new_window=true] and apply it to the board ribbon cable for two minutes. |
| [* icon_note] A hair dryer, [guide|151116|heat gun|new_window=true], or hot plate may also be used, but be careful not to overheat the phone—the display is susceptible to heat damage. |