Modifications apportées à l'étape #1
Modifié par Delia Padilla —
Modification approuvée par Delia Padilla
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* red] Lift the latch holding down the ribbon cable connected to the touch pad. | |
| [* icon_note] When inserting the cable back, ensure that it goes ***''Under''*** the white indents | |
| - | [* orange] Unscrew the 3 screws holding down the bracket on ***the bottom portion of the touch pad***, then the same for the 4 screws on the ***upper portion of the touch pad*** |
| + | [* orange] Unscrew the 3 screws holding down the bracket on ***the bottom portion of the touch pad***, then the same for the 4 screws on the ***upper portion of the touch pad.*** |
| [* black] Remove the bracket on the bottom portion of the touchpad by carefully peeling it away, as it is held by adhesives, then set it aside. |