Modifications apportées à l'étape #2
Modifié par Clay Eickemeyer —
Modification approuvée par Clay Eickemeyer
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Unfasten the heatsink | |
| [* red] Use your Phillips screwdriver to remove the two 4.7 mm screws securing the top left and bottom left edges of the heatsink. | |
| [* orange] Use your Phillips screwdriver to fully loosen the eight captive screws securing the center of the heatsink. | |
| [* icon_note] These screws aren't designed to come out. However, if one does come out, set it and its spring aside. | |
| + | [* icon_reminder] During reassembly, tighten these screws in an ***X***-pattern to evenly compress the thermal paste. |