Modifications apportées à l'étape #22
Modifié par Alex Diaz-Kokaisl —
Modification approuvée par Alex Diaz-Kokaisl
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* icon_note] Make sure all of the connectors are above the logic board before securing it back into the frame. | |
| [* black] While pressing down on the white logic board bracket, push the logic board against the left edge of the phone. | |
| [* black] Position the logic board over the upper alignment peg. | |
| [* black] Press down to reinstall the logic board. | |
| - | [* icon_reminder] If the logic board looks uneven, make sure it's sitting properly on its alignment pegs and metal clips. |
| + | [* icon_reminder] If the logic board looks uneven, make sure it's sitting properly on its alignment pegs and metal clips before trying again. |