Modifications apportées à l'étape #6
Lignes de l'étape
| - | [title] Remove |
|---|---|
| + | [title] Remove Circuitry Housing Lid |
| [* red] Remove the 4 screws holding the clear housing lid onto the base | |
| - | [* black] Gently pry the clear lid away from the base. There is a rubber gasket here, but no glue. Mine was pretty easy to pry open |
| + | [* black] Gently pry the clear lid away from the base. There is a rubber gasket here, but no glue. Mine was pretty easy to pry open |