Modifications apportées à l'étape #4
Modifié par Josiah Collmer —
Modification approuvée par Josiah Collmer
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Using the iFixit plastic opening tool, wedge it into the seam of the bottom plate. This will create a small gap between the sections that you can gently pry open. Work your way around to each side of the device until the bottom pops free. | |
| - | [* |
| + | [* icon_caution] Note: DO NOT attempt to fully remove the bottom plate yet, as there are still connected wires. Doing so may result in damage to your device. |