Modifications apportées à l'étape #5
Modifié par Nicholas Clauser —
Modification approuvée par Nicholas Clauser
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* red] Remove the screw located in the M.2 slot. This screw is a 2mm Philips. Placeholder image shown. | |
| [* icon_caution] Do not lose this screw! It must be reused later. | |
| [* green] Gently grasp the SSD from the side of where the screw was located. | |
| [* yellow] Pull the SSD to remove it from the M.2 slot. If the SSD does not immediately release, gently wiggle it. | |
| - | [* black] Remove the SSD from the plastic shroud. |
| + | [* black] Remove the SSD from the plastic shroud, and take note of the orientation of the hard drive. |