Modifications apportées à l'étape #7
Modifié par Arturo Moreno —
Modification approuvée par Arturo Moreno
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Place the flat side of the spudger between the SSD shield (right) and the metal plate (left) at a 45-degree angle |
|---|---|
| - | [* black] Pry open the bottom part of metal plate by moving the spudger toward the SSD shield |
| + | [* black] Place the flat side of the spudger between the SSD shield (right) and the metal plate (left) at a 45-degree angle. |
| + | [* black] Pry open the bottom part of the metal plate by moving the spudger toward the SSD shield. |