Modifications apportées à l'étape #2
Modifié par Anthony Miles —
Modification approuvée par Anthony Miles
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* red] Using the flat head #4.5 screw driver, carefully lever and rotate the driver around the edge of the speaker to enlarge the gap further. | |
| + | [* icon_note] Here, it is ideal to use a spudger as opposed to the flathead screwdriver, however, the flathead makes it so much easier to pry off the cap. |
| [* black] Pry off the base of the speaker and remove the end cap. |