Modifications apportées à l'étape #14
Modifié par David Kamp —
Modification approuvée par David Kamp
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Unscrew the nut holding the fan in place and remove all hardware from the threaded shaft |
|---|---|
| + | [* black] Unscrew the nut holding the fan in place and remove all hardware from the threaded shaft. |
| [* icon_reminder] There should be a nylon-insert lock nut, a flat washer and a split ring washer. Set these aside in a safe location. | |
| - | [* icon_note] Use a 13mm socket wrench to do this, with an extension to reach the nut if necessary |
| + | [* icon_note] Use a 13mm socket wrench to do this, with an extension to reach the nut if necessary. |