Modifications apportées à l'étape #1
Modifié par Sarah Westberg —
Modification approuvée par Sarah Westberg
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Flip the projector |
|---|---|
| - | [* red] Remove the 10.0 mm screws with a Phillips #0 screwdriver. |
| - | [* icon_note] The screws are deep in the holes |
| - | [* orange] Remove the 20.0 mm screws with a Phillips #0 screwdriver. |
| + | [* black] Flip the projector so that the bottom is facing up. |
| + | [* red] Remove the eight 10.0 mm screws with a Phillips #0 screwdriver. |
| + | [* icon_note] The screws are set deep in the holes. Be careful not to drop the screws. |
| + | [* orange] Remove the two 20.0 mm screws with a Phillips #0 screwdriver. |