Modifications apportées à l'étape #2
Modifié par David Beltran Heredia —
Modification approuvée par David Beltran Heredia
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] There are 8 screws on the case which need to be loosened. Some might come all the way out, some might not. |
|---|---|
| - | [* black] Use the screwdriver with the t5 bit to loosen all the screws. If the screws come out, store them somewhere safe, if not, just make sure they are loosened all the way. |
| - | [* black] If they all come out, take the case off, if not, use the opening pick to pry the case off. |
| + | [* black] Remove the back case. |
| + | [* black] In order to reach the battery, you will need to remove the back case. There are 8 screws on the case which need to be loosened. Some might come all the way out, some might not. |
| + | [* black] Use the iFixit Precision Bit Driver with the T5 Torx Screwdriver bit(1.4mm) to loosen and remove all the screws. Once loosened, store them somewhere safe for the reassembly. |
| + | [* black] If you're having issues removing the back cover of the case, be sure to use the opening pick to pry the case open carefully. |