Modifications apportées à l'étape #3
Modifié par AYUSH GUPTA —
Modification approuvée par AYUSH GUPTA
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] After removing the battery, use a Phillips #00 screwdriver to remove the single screw located on the maintenance cover at the back of the laptop |
|---|---|
| - | [* black] Gently remove the maintenance cover. |
| + | [* red] Use a Phillips #1 to unscrew one 7.0 mm screw from the hard drive/RAM panel. |
| + | [* icon_note] You cannot remove the screw from the panel. Simply unscrew it until loosened. |
| + | [* black] Pull the cover towards you and up from the device to remove it. |
| + | [* icon_note] Hearing a popping noise while wedging the plastic opening tool is normal. |